New 3P connected body with remote function surge protection

FOB התייחסות מחיר:קבל מחיר האחרון
‏6.00 $ - ‏7.40 $ | 5 חתיכה / חתיכות (min. Order)
פעילות חשודה דווח על
פרטים מהירים
מקום מוצא:
שם מותג:
מספר דגם:
Standard Discharge Current In:
Maximum discharge current:
protection level Up:
Type 2
Protection mode:
1P 2P 3P 4P 2+PE 4+PE 1+NPE 3+NPE
Optional shapes:
nominal voltage Un:
Continuous-running Voltage Uc:
work environment:
relative humidity:
יכולת אספקה
יכולת אספקה:
2000 Piece/Pieces per Day
אריזה ומשלוח
פרטי אריזה
תקן יצוא חבילה או על פי בקשת המכס
Trade Assurance

Trade Assurance 

With Trade Assurance, you're covered for:
1.Financial security
2.Quality assurance
3.Delivery guarantee

How to place an order via Trade Assurance?
>>>Click ME for more<<<

Product Description

New 3P connected body with remote function surge protection

CZ series surge protector is suitable for PT, IT, IT-S, TN-S, TN-C, TN-C-S and other power supply systems with AC 50/60Hz, 220/400V and below. The design is based on the requirements of IEC61643-A, GB18802.1, GB50057, and is usually installed in the low-voltage main distribution cabinet of the building incoming line.

model numberCZ-20/385CZ-40/385CZ-60/385
    Standard Discharge Current In(8/20)     10KA20KA30KA

Maximum discharge current       


protection level   Up≤1.6KV≤1.8kV≤2.0KV

     (Front-end recommended special 

backup protector)







classificationType 2
Protection mode1P   2P   3P   4P   2+PE   4+PE   1+NPE   3+NPE
 Optional shapesAC(Choosable)
nominal voltage  Un110V/220V/380V
  Continuous-running Voltage Uc385V
work environment-40℃~+70℃
 relative humidity≤95%(25℃)
Failure indicationNormal green or colorless, failing red or black
TelesignallingDry contact (14-11 normally open, 11-12 normally closed)
Test basisGB18802.1      IEC61643-11 

  • Modular - replace the protection module without power failure
  • High current - up to 100KA (8/20)
  • High speed - action response time is less than 25ns
  • Status display—window color indicates that the protector is working green (normal), red (fault)

  • With overheat protection.
  • Shell protection grade ip20 flame retardant grade UL94 V0
  • Eliminate fires with the latest thermal release technology
  • Special impact fuses for high reliability
  • Large flow capacity, low residual pressure, fast response time
  • Craftsmanship, long-term work in harsh environments such as acid, alkali, dust, salt spray and humidity
  • Kevin wiring can be realized; the structure is rigorous, the installation is convenient, and the maintenance is simple

Use and maintenance

After the power module surge protector fails, the green indicator on the indicator window will turn red, and the protector should be replaced immediately.

In the normal use of this surge protector, especially during the thunderstorm season, the grounding system of the surge protector should be checked in time to keep it in good grounding condition, otherwise the protection effect of the surge protector will be affected to varying degrees. When the grounding wire PE is open, the surge protector will be disabled.



1 This power module surge protector can be combined according to different requirements and applied to single-phase and three-phase TT/TN/IT power supply systems to meet the protection requirements of different power systems. When installing on the 35mm rail, the Kevin is preferred. Wiring method can also be used as follows.

2 The surge protector should be installed after the fuse of the power supply line. The capacity of the fuse should not exceed 315A GL/gG. If this value is exceeded, a 315A GL/gG fuse should be added to the surge protection branch.

3 According to the logo of the protector, the wiring connection shall be as follows: the insulated copper wire with a cross-sectional area of not less than 10mm2 and the withstand voltage not lower than 500v AC, the length of the Boxian length of 13-15mm shall be as short as possible and not more than 0.5m. Meet the requirements of relevant standards.


Company Information



Packaging & Shipping


Q1:Are you manufactuiring or selling?

A1:If you want to buy a product, I am a manufacturer; if you want to serve, I am a service provider. My job is to give you the best quality on a cheap basis.


Q2:I can’t find the product on your catalogue, can you make this product for me?
A2: Our catalogue shows most of our products,but not all.So just let us know what product do you need.

We have the professional enginer team which can design and develop the mold to arrive different customer nequirement.

We also have the sales team to offer good service from pre-sale to after-sale.


Q3:If I Have Custom-made Requirement, Do You Have Person To Design According To My Concept?

A3:Certainly.our design team will do for you. 


Q4:How about warranty?

A4:According to the actual situation. Each product will be different warranty,please contact us.


Q5: What’s your warranty terms? 

A5: We offer 12-24 months warranty time.

Q6:What is payment terms?

A6: T/T,Paypal,Western Union and L/C isacceptable.Please be sure that we can receive the same amount of the Invoice. And you can pay money In RMB. No problem.

contact us

ייתכן רוצה
Bukan benar-benar yang Anda inginkan? 1 permintaan, beberapa tagihan Dapatkan Tagihan Sekarang >>
תוצאות מוצרים או ספקים אלו תורגמו לנוחותך באופן אוטומטי על-ידי הכלי לתרגום שפות. אם מצאת בעיה בתוצאות התרגום, אתה מוזמן להציע הצעות.
כל המידע אודות מוצרים וספקים בדף זה בשפות שאינן אנגלית הוא מידע של שתורגם באופן אוטומטי באמצעותה כלי לתרגום שפות. Iאפ יש לך שאיתות או הצעות בנוגע לאיכות התרגום האוטומטי, צור קשר בכתובת התרגום הוא תהליך אוטומטי שמבוצע באמצעים טכניים. לא השתתפה בתרגום, אינה שולטת בו ואינה מודעת לתוכן הפריטים. והגורמים המסונפים לה מכריזים בזאת באופן מפורש שהם אינם אחראים בכל צורה מפורשת או משתמעת לכל אובדן הנובע מהסתמכות על מידע המתורגם באופן אוטומטי או הנגרם כתוצאה משגיאה טכנית כלשהי בכלי לתרגום שפות.